Installation of the bouncy castle
1 Put the bouncy castle on a flat ground, it’s better to put a piece of fabric under it (such as carpet, PVC tarpaulin, etc), then unfold the bouncy castle.
2 Find the air inlet of the inflatable bounce house, connect it to the air inlet of blower, and tie the connection part tightly.
3 Connect the blower to power source, then the inflatable bounce house will be blow up in 5-10 minutes.
How to use the electric blower correctly?
1 Use the national standard 2.5m2 – 4m2 cable to connect with the blower, connect the air switch at another end, and connect the electric shock protector.
2 Before start using, user should check whether the power supply voltage matches the nameplate and whether the direction of rotation is correct.
Inflatable bounce house clearing and maintenance collection
1 Cut off the power supply, open all the air outlets, it usually need about 10-30 minutes to deflate the air. The remaining air must be squeezed out by hand, if water comes into the bounce house because of rain, it must be drained dried.
2 You can use washing powder or detergent to wipe off the stains and oil stains, then scrub the bouncy castle with clean water, and dry it in the sun. Please pay attention that the digital painting part should only be cleaned by clean water, no washing powder or detergent, because it will cause fade problem.
3 Fold the inflatable bouncy castle with its own bottom surface, and cover it with cushion cloth.
4 If it is not used for a long time, please fold, bundle and pack the clean bounce house, then store it under the temperature of -20 ~+40 degrees Celsius.
5 The blower should be protected from moisture and corrosion. Pay attention to the inflatable bounce house to prevent rodents and insect bites.
